Order and replace your Volvo Car Mirror glass only replacement.
Choose the Model of your Volvo Vehicle
Installation Guide for Volvo car mirror
Read this page and learn how to install your car mirror glass only product
Its always such a hassle when you break your Volvo side view mirror. I myself have hit many a mailbox in my day that cracked the car mirror or the mirror assembly. Lots of people think they have to go to the Volvo dealership to get the whole assembly. In some cases you have to, but most of the time its just the glass itself that is broken. Why spend $550.00 dollars and up to have it replace the assembly by the dealer or a when you can fix it yourself easily and affordably.
Did you ever notice the Volvo passenger side mirror always has the "objects are closer" text on the mirror. This mirror is designed this way to increase your field of vision and to eliminate the blind spot problem. Its always a good thing to replace that with a convex mirror glass verses a normal mirror. Don't substitute this as one day it might save your life.
An Volvo glass only side view mirror is made of 2.2mm 1st surface mirror properties. This mirror is actually translucent. Meaning that light will travel through and absorb the light from the car behind you at night. USA Federal Motor Vehicle Safety Code 571.111 require this mirror to absorb 40 to 60 percent of light and convex mirror with a specific bend. However during the day during, the mirror is 100% reflective. We only sell mirrors that conform with DOT standards. Our mirrors are made in the USA, and all comply to US Standards. Beware of the 9 dollar mirror that you are seeing on sale these days on the internet, as these mirrors might not conform to USA standards. Car or Truck mirrors should be installed using the car mirror to a plastic frame plate. Without this plastic frame the glass has nothing to rest into the car mirror housing. We do not suggest the use of normal bathroom silicone adhesive, which everyone has laying around at somewhere in their house or apartment. Latex type silicone does not adhere well to glass, but does to the plastic frame. We suggested using a construction silicone which is non latex based. If you don't have any then get a small tube at your local hardware store, or order the tube online with us.
How to remove and replace your car mirror from the frame
Now how do you remove that old Volvo mirror to get the new one in. Well, you first must breakdown the mirror from the plate called a frame. One simple way to do this is to get a flat strong instrument like a wide screw driver or a automotive scraper. Not many of you have the scraper, but when you go to our order form page we could sell you one. Its a nice thing to have around your toolbox. Now to loosen the adhesive from the plate you must apply some heat. Ideally a propane torch is good, but if you have the wife's hairdryer or a heat gun that will also work. Heat up the mirror enough so that the adhesive behind the Volvo mirror will loosen get the screwdriver, putty knife, or the scraper under the mirror and pull all the broken pieces off the frame. Make sure you are wearing gloves and protective eyewear, oh, and its also a smart idea to put a small garbage bucket under the housing you are working on, so that the glass falls into the bucket and not on the ground. After the side view mirror glass is removed, make sure all the mirror and adhesive is clean off the framed plate.
Once you have removed your Volvo side view mirror from the frame, you now need to apply the glue to the black frame. First thing to do is clean the glass with water. Do not use glass cleaner or any chemical related cleaner. Apply the glue outward so it extends past the lip of the frame. I call this the snow cone effect. Glue it in 5 spots. One in the middle and 4 in the middle corners. Don't get too close to the frames edge, as it will ooze out of the frame, making a mess. If you order the silicone from us or have purchased a tube, cut a 3/8 inch diameter from the tip. Use Large dabs of the adhesive 3/8" inch wide by 1/2" outwards. Remember you are not installing a windshield that requires a strong adhesive. Once you have adhered the mirror to the plate, get some easily removable tape, like masking tape, and tape the mirror around the mirror housing so that the mirror will not slide off the frame. This will also allow you to drive. Keep the tape on for 24 hours for cold climates and 5 hours in warm until the glue dries.
How To Try and Save your Heating element
Many of you have heating elements behind the mirror. Some heated mirrors will have a heating element mark on the mirror. However to make sure you have a heating element, move the frame as much as you can to the side, and look behind the frame. You will notice wires going into the frame. This is a good indication you have a heated mirror. Best way to remove the heating element from the car mirror is to use a household hairdryer. This will not make your mirror not hot enough to melt the heating element. Then take a square utility razor, start at the corner, and slowly peal the element off the mirror being you are breaking down a rubber based spray adhesive. TAKE YOUR TIME removing the broken mirror from the heating element. Then reapply the element to the new mirrors using the silicone we sell around the edge of the heating element onto the mirror, let it dry 24 hours. We also received an email from another customer that removed the element by brushing paint thinner over the heating element, letting it soak in for about 15 minutes, then pealing it off the mirror glass. However using the paint thinner can melt the plastic element. So brush it and keep it to the 15 minute limit as not to do damage to the element. We have yet to try this, but nobody has yet to complain about this method.
Installing a Electro chromatic Self Dimming Fit Over Car mirror
The self dimming mirror was a revolutionary design created back in the early 90's on many high end vehicles which today is becoming a newer standard. The structure of this mirror is made up of 2 pieces of glass with a electro-chromatic liquid that is voltage charged to dim when light hits a sensor, making the mirror darken, thus the blinding effect of the vehicle behind you less severe. The lifespan of this product is around 8 to 12 year before you start to notice it turning black, rust, or distorted. Many of these failed mirrors if purchased through the dealer could cost between 400 to 500 dollars if still in production. Please note there are no aftermarket replacement for these mirrors, be careful if you see one online that say it does so. We have then created a mirror that is the only option other than finding one in a junk yard or dealership. Our mirrors are made of First Surface Chromium, that absorbs 40 percent of the light, as the dimming feature absorbed between 60 to 74 percent. So if you see mirrors being sold online, without mention of being made in the USA, then Asia sells a low grade Aluminum Oxide product that might absorb only 15%.Many will only sell the whole housing, and they have the same life expectancy as the one on your vehicle. We sell a self dimming fit over mirror that perfectly fits between the frame lip. Every self dimming mirror also had a heating element behind these mirrors. When replacing this mirror you are never to remove the old glass. We recommend that if you have a cracked or broken mirror, and you notice the liquid coming out of the mirror is to bring it to a car was and use the power spray wand they offer, and blast the frame, thus removing the liquid so to insure a proper bond of the silicone glue. To properly install this mirror, you are to dot the failed mirror with silicone, using a pattern of 1/4 inch dots 1/4 inch apart 1/2 inch from the frame edge. Apply the glue as it would look like it has the measles. By doing so, when you apply the new mirror between the inner frame lip, you have created a silicone page as the dots will connect forming the self made pad. The reason for doing this is to transfer the heat coming from the heating element behind the old mirror and to disperse the heat evenly throughout the mirror. If you just glued it in spots, then those areas will heat the new mirror and not the whole mirror. Do not use the circle pads that many companies give for installation as you will see circles on your new mirror as that will be the only area that will melt the ice, snow or fog. Do not hesitate calling us for further information on this installation. Our phone number is below, and you will be surprised your not calling the Philippines.
Gluing a mirror that has fallen out of the frame for no reason.
In the last 6 or 7 years, we have been selling a lot of mirrors that the glass has fallen out of the frame for no reason. One of the biggest problems cars has been the Saab 93 95, Volvo S series, Volkswagen Passat and Jetta to name a few. There are another 20 or 30 makes and models that has had this problem in recent years. There are several factors causing this to happen. To find out more, ask our customer service reps while you have them on the phone. Most important, there is a special way to re glue this mirror to the frame attachment properly to make it bond, and if you have a heating element, it is an effective way for the heat from the element to transfer to the glass. For some reason, the manufacture of these products either used a small amount of double sided tape, used hot acrylic bonding to name a few.The main culprit with mirrors with heating elements we're the use of spray adhesive onto a black pad. Behind this black pad is a heating element. If you have this situation, please refer to the installation of Installing a Electro chromatic self dimming mirror installation. It is the same principle. By dotting the glue, as explained above, your mirrors heating function will work much better than just globing the glue onto the frame. It will disperse the heat from the element that is behind the black pad. The silicone that we sell is perfect in adhering this mirror properly. I have enclosed a picture of a mirror that the glass fell out of the frame, that had the black pad, and the heating element is behind the black pad. Again. Do not remove this black pad. Glue the black pad as explained. To see this mirror CLICK HERE
For more information please Click on the Model of your vehicle where you can order your Car or truck mirror today. We have all car mirrors in stock and ready to ship. If your looking for a just the mirror we are the car mirror for cars shopping guide.
For more information please Click on the Model of your vehicle where you can order your Car or truck mirror today. We have all car mirrors in stock and ready to ship. If your looking for a Volvo just the mirror we are the car mirror for cars shopping guide.
We ship to the following destinations.
Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming, AFO, APO, AE, United States Military. Virgin Islands, Canada, Mexico, Puerto Rico, and International World Wide.
This page was specifically built for the following cars.
Volvo 1967-1977 car side view mirror glass, Volvo 240 car side view mirror glass, Volvo 740 side view mirror glass, Volvo 790 car side view mirror glass, Volvo 840 car side view mirror glass, Volvo 850 car side view mirror glass, Volvo 940 car side view mirror glass, Volvo 960 car side view mirror glass, Volvo c30 car side view mirror glass, Volvo C30 side view mirror glass, Volvo S40 car side view mirror glass, Volvo S60 car side view mirror glass, Volvo S70 car side view mirror glass, Volvo S80 car side view mirror glass, Volvo S90 car side view mirror glass, Volvo XC70 car side view mirror glass, Volvo XC90 side view mirror glass, Volvo Cross County car side view mirror glass,
We have these in stock and will ship within 24 hours of your order.
Hometown Glass Corp/Internet Glass Network, Washingtonville NY 845-496-2500
Internet Processing Headquarters 515 Barberry
Ln, New Windsor NY 12553
Copyright © 2015 [Internet Glass Network, Hometown Glass Corp]. All rights reserved.